Make: CMI / TEREX
Size: Drum Factory Rated @ 500 TPH
Type: 400–500 TPH Semi-Portable Counterflow Drum Plant
**Cold Feed System**
CMI Seven (7) Bin 10' x 14' Stationary Cold Feed System
Nominal 30" wide feeders with 5 HP AC drives
Nominal 30" wide integral collecting conveyor with folding head section
Full-length walkway with steps for accessibility
Bins relined with AR plate
No-flow switches, tachometers, and positive lock gates
Bin dividers to help keep heaped material separated
**Scalping Screen**
5' x 10' single-deck Virgin Aggregate Scalping Screen
10 HP drive
**Virgin Scale Conveyor**
Portable CMI 30" x 50' long Virgin Scale Conveyor
Receiving trough and belt scale
Mounted on single-axle suspension (scalping screen located on same frame)
**Drum**
2014 Terex Model #E3-500S Stationary High Recycle Counterflow Drum
New flights and liners 2024
15' slinger feed conveyor
Trunnion driven with (4) 50 HP motors and heavy-duty Dodge TXT 8 reducers
Hauck StarJet 750 burner set up on natural gas with gas train
Recycle entry collar, dust injection screw conveyor, and support stands
Average shell thickness: .490"
Primary Collector
Vertical stationary cyclone with dust return via auger to drum recycle entry
Heavy-duty independent support structure
**Baghouse**
Portable CMI Model #RA-418P Roto-Aire Baghouse
Over 18,000 sq. ft. of cloth
Factory rated @ 85,000 ACFM
Mounted fan with twin 100 HP drives
Dual auger dust removal (bottom-mounted)
Triple-axle suspension (no rims on tires)
Dust / Lime Silo
2009 Terex self-erect, nominal 500 BBL
Weigh pod, air lock, load cells, and controls included
Top-mounted filter vent
Tandem-axle portable with 60 HP Gardner Denver blower
**AC Tanks**
(1) CMI portable 2-compartment 30,000-gallon coiled AC tank
Gooseneck-mounted CEI 2 MBTU combo fuel hot oil heater
Rear-mounted 3" metering skid with flow meters
Light coking — empty (tandem axle, no tires or rims)
was professionally cleaned out winter 2022
**(1)** Portable 30,000-gallon coiled AC tank with (3) top-mounted agitators
Light coking — empty (tandem axle, no tires or rims)
**(1)** Portable 20,000-gallon coiled AC tank
Light coking, small residual material (but empty)
Tandem axle (tires, no rims)
**(1)** Portable 35,000-gallon coiled AC tank with (3) top-mounted agitators
Surplus 3" metering skid
Light coking — empty (tandem axle, no tires or rims)
**Recycle System**
CMI Two (2) Bin 10' x 14' Stationary Recycle System
Nominal 30" wide feeders with 5 HP AC drives
30" wide integral collecting conveyor with folding head section
Full-length walkway with ladder access
Equipped with vibrators and air cannons
Includes 5' x 10' single-deck scalping screen
Stationary CMI conveyor with belt scale and gravity take-up feeding into recycle collar (heavy-duty truss frame)
**Silo System**
Three (3) CMI nominal 210-ton silos, silo 2 new cone liners
30" single-chain main drag slat conveyor
33" x 51" oil-heated box floor with booster pump package
Low-point reject chute
75 HP motor with Rex reducer
(2) CMI DC3017 dual-chain oil-heated transfer conveyors (30" x 17')
Driven by 30 HP motors with Dodge reducers
4-section 80' above-ground steel truck scale
**(All 3 silos are empty)**
**Controls & Electrical**
Stationary CMI control house with heating and air conditioning
April 2024 Minds plant controls, CMC Auotomation, All PLC based
CMI Energy Center complete with AC and soft starts for burner, blower, and drum
Balance of starters in individual buckets
1,200 amp main
**ADDITIONAL NOTES**
Plant is in very good condition with many upgrades
Spare parts included (stored in two conex boxes)
Two compressors included
Some components portable, but silo package, cold feed, and RAP systems are stationary
Drum on portable frame with kingpin plate (no axles or erection gear)
Baghouse bags and ductwork in good condition
Drum shell thickness and flights in good condition (one row of mixing flights needs attention)
Silo and cold feed system appear to be in very good condition
The Drum Has 6 Access Panels
